GE Industrial Solutions AF-600 FP High Power (460V_575V 150HP and above) - Manual (Page 106)

7.2.6 Gate Drive Card
1. Disconnect the cables from the connectors on gate drive card MK100, MK102, MK103, MK104, MK106, and, if the unit has a brake option, MK105, and,
for 380-480 V units with an RFI filter, MK101.
2. Remove the gate drive card by removing the 6 mounting screws (T25 Torx) from the standoffs.
Reinstall in reverse order of this procedure. Tighten the mounting screws to 2.3 Nm (20 in-lbs).
130BX160.10
2 3
4 5 6 7
1
Illustration 7.1: Gate Drive Card
1 MK100 (temperature sensor)
2 MK101 (RFI filter)
3 MK106
4 MK105 (brake option)
5 MK102 (U)
6 MK103 (V)
7 MK104 (W)
AF-650 GP and AF-600 FP High Power Service Manual
105
7