GE Industrial Solutions AF-600 FP High Power (460V_575V 150HP and above) - Manual (Page 86)

6.3 Dynamic Test Procedures
Refer to the terminal locations in Illustration 6-10 for performing dynamic test procedures.
NB!
Test procedures in this section are numbered for reference only. Tests do not need to be performed in this order. Perform tests only as necessary.
Never disconnect the input cabling to the frequency converter with power applied due to danger of severe injury or death.
Take all the necessary safety precautions for system start up prior to applying power to the frequency converter.
130BX79.10
1
2
3
4
Illustration 6.12: Drive Power Terminals (4x-size Frames)
1 Main 3-phase AC power to frequency converter 3 Brake resistor connection
2 DC bus/load sharing connections 4 3-phase output to motor
AF-650 GP and AF-600 FP High Power Service Manual
85
6