GE Industrial Solutions AF-600 FP High Power (460V_575V 150HP and above) - Manual (Page 60)

ALARM 245, Heatsink sensor
This alarm is only for 6x Frame frequency converters. It is equivalent to Alarm 39. The report value in the alarm log indicates which power module generated the
alarm:
1 = left most inverter module.
2 = middle inverter module in 62 or 64 drive.
2 = right inverter module in 61 or 63 drive.
3 = right inverter module in 62 or 64 drive.
5 = rectifier module.
ALARM 246, Power card supply
This alarm is only for 6x Frame frequency converters. It is equivalent to Alarm 46. The report value in the alarm log indicates which power module generated the
alarm:
1 = left most inverter module.
2 = middle inverter module in 62 or 64 drive.
2 = right inverter module in 61 or 63 drive.
3 = right inverter module in 62 or 64 drive.
5 = rectifier module.
ALARM 247, Power card temperature
This alarm is only for 6x Frame frequency converters. It is equivalent to Alarm 69. The report value in the alarm log indicates which power module generated the
alarm:
1 = left most inverter module.
2 = middle inverter module in 62 or 64 drive.
2 = right inverter module in 61 or 63 drive.
3 = right inverter module in 62 or 64 drive.
5 = rectifier module.
ALARM 248, Illegal power section configuration
This alarm is only for 6x frame frequency converters. It is equivalent to Alarm 79. The report value in the alarm log indicates which power module generated the
alarm:
1 = left most inverter module.
2 = middle inverter module in 62 or 64 drive.
2 = right inverter module in 61 or 63 drive.
3 = right inverter module in 62 or 64 drive.
5 = rectifier module.
ALARM 250, New spare part
The power or switch mode power supply has been exchanged. The frequency converter model number must be restored in the EEPROM. Remember to select
‘Save to EEPROM’ to complete.
ALARM 251, New model number
The frequency converter has a new model number.
AF-650 GP and AF-600 FP High Power Service Manual
59
4