GE Industrial Solutions AF-600 FP High Power (460V_575V 150HP and above) - Manual (Page 17)

Indicator lights (LEDs):
If certain threshold values are exceeded, the alarm and/or warning LED lights up. A status and alarm text appears on the keypad.
The On indicator lamp is activated when the frequency converter receives power from mains voltage, a DC bus terminal, or an external 24 V supply. At the same
time, the back light is on.
• Green LED/On: Control section is working.
• Yellow LED/Warn.: Indicates a warning.
• Flashing Red LED/Alarm: Indicates an alarm.
Keypad keys
Menu keys
The menu keys are divided into functions. The keys below the display and
indicator lamps are used for parameter set-up, including choice of display
indication during normal operation.
[Status]
indicates the status of the frequency converter and/or the motor. Three different readouts can be chosen by pressing the [Status] key:
5 line readouts, 4 line readouts or Logic Controller.
Use
[Status] for selecting the mode of display or for changing back to Display mode from either the Quick Menu mode, the Main Menu mode or Alarm mode. Also
use the [Status] key to toggle single or double readout mode.
[Quick Menu]
allows quick set-up of the frequency converter. The most common functions can be programmed here.
The [Quick Menu] consists of:
- Quick Start
- Quick Set-up
- Function set-up
- Changes Made
- Trendings
The Function set-up provides quick and easy access to all parameters required for the majority of applications. Among other features it also includes parameters
for selecting which variables to display on the Keypad.
AF-650 GP and AF-600 FP High Power Service Manual
16
2