GE Industrial Solutions AF-600 FP High Power (460V_575V 150HP and above) - Manual (Page 134)

8.2.5 Gate Drive Card
1. Disconnect the cables from connectors on the gate drive card MK100, MK102, MK103, MK104, MK106, and, if unit has a brake option, MK105, and, for
380–480 V units with an RFI filter, MK101.
2. Remove the gate drive card by removing the 6 mounting screws (T25 Torx) from the standoffs.
Reinstall in reverse order of this procedure. Tighten the mounting screws to 2.3 Nm (20 in-lbs).
130BX160.10
2 3
4 5 6 7
1
Illustration 8.1: Gate Drive Card.
1 MK100 5 MK102 (U)
2 MK101 (RFI filter) 6 MK103 (V)
3 MK106 7 MK104 (W)
4 MK105 (brake option)
AF-650 GP and AF-600 FP High Power Service Manual
133
8