GE Industrial Solutions AF-600 FP High Power (460V_575V 150HP and above) - Manual (Page 18)

[Main Menu]
is used for programming all parameters. The Main Menu parameters can be accessed immediately unless a password has been created via par. K-60, K-61, K-65
and K-66.
Parameter shortcut can be carried out by pressing down the
[Main Menu] key for 3 seconds. The parameter shortcut allows direct access to any parameter.
[Alarm Log]
displays an Alarm list of the five latest alarms (numbered A1-A5). To obtain additional details about an alarm, use the arrow keys to find the alarm number and
press [OK]. Information is displayed about the condition of the frequency converter before it enters the alarm mode.
The [Alarm log] button on the Keypad allows access to both the Alarm log and Maintenance log.
[Back]
reverts to the previous step or layer in the navigation structure.
[Cancel]
last change or command will be cancelled as long as the display has not been changed.
[Info]
displays information about a command, parameter, or function in any display window. [Info] provides detailed information when needed.
Exit Info mode by pressing either [Info], [Back], or [Cancel].
Navigation keys
The four navigation arrows are used to navigate between the different
choices available in [Quick Menu], [Main Menu] and [Alarm Log]. Use the
keys to move the cursor.
[OK] is used for choosing a parameter marked by the cursor and for enabling
the change of a parameter.
Operation keys for local control are found at the bottom of the keypad.
AF-650 GP and AF-600 FP High Power Service Manual
17
2