Luminex xPONENT 4.0 SP1 - Manual (Page 25)

13
Touring the Software
Installed Protocols. Displays a list of protocols. The list contains the following information
about each protocol:
• Name
• Version
• Manufacturer
• Date
Use the up and down arrows on the right to move through the list of protocols.
View. Opens the Settings tab of the Protocols page to view the selected protocol. This
tab enables viewing the settings, analytes, and plate layout for the selected protocol.
Daily Activities. Contains shortcut buttons to common commands in the xPONENT
®
software:
• System Initialization - Opens the System Initialization command in the Auto Maint
tab on the Maintenance page. For more information about this tab, see “Auto Maint
Tab” on page 69.
• Shutdown - Opens the System Shutdown command in the Auto Maint tab on the
Maintenance page. For more information about this tab, see “Auto Maint Tab” on
page 69.
• Probe and Heater - Opens the Probe and Heater tab on the Maintenance page. For
more information about this tab, see “Probe and Heater Tab” on page 75.
Sys Info. Opens the System Info tab of the Maintenance page. For more information,
see “System Info Tab” on page 77.
Reports. Opens the Reports tab of the Results page. For more information, see “Reports
Tab” on page 52.
Samples
Use this page to create new samples, view the details of a sample list, or to create a new
batch. Samples can also be added via a Lab Information System (LIS).
This page contains the following tabs:
• Create Sample - Displays when the Create New Samples button is clicked.
• Edit Samples - Displays when the Details button is clicked.
• Protocol - Displays when the Create Batch button is clicked.
• Stds & Ctrls - Displays when the Create Batch button is clicked.
• Plate Layout - Displays when the Create Batch button is clicked.