Teledyne LeCroy LabMaster 9Zi-A - Manual (Page 213)

Getting Started Manual
922157-00 Rev A 205
6. Depending on your selection, you may need to touch the SubFormat
control and select a subformat.

Byte - Available when selecting Binary format, specifies the
samples in the output file are represented with 8 bits.
NOTE: Using this option can result in a loss of output file resolution.

Amplitude only - Specifies the output file include amplitude data
for each sample, but not sample time information.

Time and Amplitude - Specifies the output file include both time
and amplitude data for each sample.

With Header - Specifies to include a header with scaling
information.
If you select ASCII, touch the Delimiter control and select a delimiter
character from the pop-up menu. Choose from comma, space,
semicolon, or tab delimiters.
7. You can use the Auto Save feature to automatically save a waveform
to disk after each new trigger. You can enable Auto Save from the
Save Waveform dialog by touching one of the Auto Save buttons.
8. Select Wrap (old files overwritten) or Fill (no files overwritten).
9. Touch the Browse button next to the Save file in directory control
and navigate to the location where you want the file saved. The file
name is assigned automatically and is shown under the control.
10. Finally, touch the Save Now! button.