Teledyne LeCroy LabMaster 9Zi-A - Manual (Page 27)

Getting Started Manual
922157-00 Rev A 19
Back of CPU Module
Number and Description
1. AC Power Plug
2. Removable Hard Drive
3. The I/O Panel
4. DVI-D Video Output
5. PCIe 4 Lane Data
Inputs (from
corresponding Slave
Acquisition Modules).
PLEASE NOTE THE FOLLOWING :

The PCIe 4 Lane Data Inputs (item 5) also accommodate PCIe Expansion
Slot options for GPIB and LSIB. Option cards must be specified when
ordering and installed at the Teledyne LeCroy factory into any number of
the same five slots used for the Acquisition Modules. The slot between
the DVI-D Video Output connector and the PCIe 4 Lane Data Connection
for Channels 1-4 is unavailable.

The DVI-D Video Output connector (item 4) must be connected to the
DVI-D Video Input on the back of the 9xxMZi-A Master Acquisition Module
with the supplied 1 meter cable for your touch-screen display to function.