Teledyne LeCroy LabMaster 9Zi-A - Manual (Page 26)

LabMaster 9 Zi-A
18 922157-00 Rev A
PLEASE NOTE THE FOLLOWING:

Cap off unused ChannelSync SMA sockets (item 1) using the provided
chain-linked 50 Ω terminations.

VGA/WXGA Video Input connectors (item 5) must be connected with
the supplied 1 meter cable to the VGA/WXGA Video Output on the
CPU Module for your touch-screen display to function.

10 MHz Reference Clock Inputs are specifically intended for
synchronization with other instruments; not between Master and Slave
modules.
Front of CPU Module
In the Master Acquisition Module configuration, the 9xxMZi-A Master
Acquisition Module connects to a separate CPU Module, shown below.