Teledyne LeCroy LabMaster 9Zi-A - Manual (Page 236)

LabMaster 9 Zi-A
228 922157-00 Rev A
System Recovery Tool
Your oscilloscope is designed to operate reliably for many years. The
application software operating the instrument runs on a Windows
platform. The loading or incomplete removal of additional Windows
applications can cause problems in the stability of the operating system.
Severe cases may require a reloading of the base operating system and
oscilloscope application. Teledyne LeCroy provides you with an Acronis
recovery application and a backup image in an extra partition on the
instrument's hard drive.
PLEASE NOTE THE FOLLOWING:

The recovery process produces a replica of the operating system and
oscilloscope application software at the current revision levels when
the oscilloscope was manufactured. Any further revisions of the
application software, Windows operating system, and virus scan
definition files are not automatically upgraded. Therefore, after
completion of the disk image recovery, it is highly recommended to
search vendor Web sites and upgrade the individual components to
current revision levels.

After the recovery procedure is completed, you must activate
Windows, either by Internet connection to Microsoft's Web site or
by telephone. Have your Windows Product Key number (located on
the rear of the oscilloscope) handy during Widows reactivation.

The current oscilloscope application software can be downloaded
directly from the Teledyne LeCroy website at teledynelecroy.com.
Since the calibration data for the oscilloscope is stored in the D:
drive, current calibration constants are not overwritten during the
recovery process.