Teledyne LeCroy LabMaster 9Zi-A User Manual
Page 41
Advertising
Getting Started Manual
922157-00 Rev A
33
NOTE:
The connections are specifically DVI-D.
SMA 72" Cables - Master Control Module to Slave
Acquisition Module Connection(s) for Reference Clock
Connect each SMA 10 GHz Clock Output on the back of your 9CZi-A Master
Control Module to the SMA 10 GHz Clock Input on each 9xxSZi-A Slave
Acquisition Module used in your system using the SMA 72" cable(s)
provided.
NOTE
: Use an SMA torque wrench and ensure connections are properly tightened.
Advertising