Labmaster 9 zi-a, Front of 9xxszi-a slave acquisition module – Teledyne LeCroy LabMaster 9Zi-A User Manual
Page 30
LabMaster 9 Zi-A
22
922157-00 Rev A
Front of 9xxSZi-A Slave Acquisition Module
Number and Description
1.
ProLink Compatible
Inputs
2.
2.4/2.92 mm
Compatible Inputs (on
>20 GHz Model Slave
Acquisition Modules
Only)
3.
Channel ON/OFF
Buttons
4.
Corresponding
Channel Number
Indicators
PLEASE NOTE THE FOLLOWING:
If your LabMaster system runs multiple Slave Acquisition Modules, for
optimal channel access and convenience, we recommend stacking the
modules on top of each other on your bench, inside Teledyne LeCroy's
available cart, or inside of your own rack (modules must be specifically
ordered for rack mounting from the Teledyne LeCroy factory).
The 9xxSZi-A Slave Acquisition Modules are available in a variety of
bandwidths and channel density configurations. Each example shown
previously contains a mix of 20 GHz and >20 GHz Slave Acquisition
Modules. Each Slave Acquisition Module is compatible with either Master
Module (Control or Acquisition). Refer to specifications on the datasheet
maintained a