Teledyne LeCroy LabMaster 9Zi-A - Manual (Page 35)

Getting Started Manual
922157-00 Rev A 27
9CZi-A Master Control Module Configuration
This LabMaster configuration involves making PCIe 1 and 4 Lane, DVI-D,
SMA 72", and Power Cable connections. Follow these steps to properly
connect all parts of your LabMaster setup.
PCIe 1 Lane Cable - Master Control Module to Slave
Acquisition Module SYNC Connection(s)
Connect each PCIe 1 Lane Control Output on the back of your 9CZi-A
Master Control Module to the PCIe 1 Lane Input on each 9xxSZi-A Slave
Acquisition Module used in your system using the PCIe 1 Lane cable(s)
provided.
On the back of the Master Control Module, plug one end of the PCIe 1
Lane cable into the PCIe 1 Lane Channel Sync Output (labeled SYNC).