Teledyne LeCroy LabMaster 9Zi-A - Manual (Page 234)

LabMaster 9 Zi-A
226 922157-00 Rev A
Color
You can customize the Colors used for Channels, Math, and Memory traces
both when shown on your instrument and when used in print output.
NOTE: These color settings match a waveform on the grid display (both on-screen
and printed) and show consistently on corresponding dialogs, tables, and trace
descriptor labels.
Numbered sections on this dialog correspond with the following
explanations.
1. Make color selections for Channels (Screen and Print) by touching
one of the color swatches. The Color pop-up control is shown and
may be used to specify your desired color.
2. Just like Channels, make color selections for Math Traces (Screen
and Print) by touching one of the color swatches. The Color pop-up
control is shown and may be used to specify your desired color.
3. Again, just like Channels, make color selections for Memory Traces
(Screen and Print) by touching one of the color swatches. The Color
pop-up control is shown and may be used to specify your desired
color.
4. You can use the Factory default colors button to instantly recall the
original color settings for your instrument.
NOTE: Print colors are used only when the Colors control is set to Print
on the Hardcopy dialog in Utilities → Utilities Setup... allowing colors to
still appear when printed on white paper in order to save ink/toner. For
convenience, the Preview print colors button is provided on this portion
of the dialog. When the button is touched, a preview is generated on the
grid display area. A subsequent touch of the button closes the preview.