Teledyne LeCroy LabMaster 9Zi-A - Manual (Page 237)

Getting Started Manual
922157-00 Rev A 229
Since third-party recovery software is used, our instructions certainly may
not be the most definitive or current. We advise you to take advantage of
resources available on the Acronis website - they maintain versions of their
product manuals from the following locations:
Acronis True Image Home
http://www.acronis.com/homecomputing/download/docs/
Acronis True Image Echo Workstation
http://www.acronis.com/backup-recovery/advanced-
workstation/index.html
NOTE: The following procedures cover basic steps for running the True Image
Echo Workstation. For more definitive documentation refer to their
aforementioned documentation resources.
Teledyne LeCroy provides you with a recovery application and a backup
image in an extra partition on the instrument's hard drive. The recovery
process is easy to perform, using the Recovery Wizard. After the recovery
procedure is done, you must activate Windows, either by Internet
connection to Microsoft's Web site or by telephone. Have your Windows
Product Key number (shown on a sticker on your oscilloscope) handy
during Widows reactivation.
Running the Acronis True Image Echo
Workstation Recovery Application
1. Connect a network cable to the LAN port on the rear of the
oscilloscope if you intend to activate windows through the Internet.
2. Connect a keyboard and a mouse to the oscilloscope.
3. Apply power to the oscilloscope.
4. As soon as the Starting Acronis Loader... Press F11 for Acronis
Startup Recovery Manager message appears on the screen, press
the F11 key until the recovery software logo appears momentarily.
The Acronis True Image Echo Workstation main window is
displayed.
NOTE: Do not press F11 before you see the Starting Acronis Loader
message or you will enter the MB boot sequence selection.