Teledyne LeCroy LabMaster 9Zi-A - Manual (Page 42)

LabMaster 9 Zi-A
34 922157-00 Rev A
On the back of the Master Control Module, connect one end of an
SMA 72" cable from a SMA 10 GHz Clock Output (labeled REF, unscrew the
chain-linked 50 Ω termination, if necessary).
Now, on the back of the Slave Acquisition Module, connect the other end
of the same SMA 72" cable into the corresponding SMA 10 GHz Clock Input
(labeled REF).
Repeat the previous steps for every additional Slave Acquisition Module
in your system.