Teledyne LeCroy LabMaster 9Zi-A - Manual (Page 224)

LabMaster 9 Zi-A
216 922157-00 Rev A
E-mail
The E-mail selection on the Hardcopy tab gives you the option to e-mail
your screen images, using either the MAPI or SMTP protocols. Before you
output to e-mail from the Utilities dialog, you first have to set up the e-mail
server and recipient address in Preference Setup.... Choose from either of
the following methods to e-mail your screen image:
Press the P
RINT
front panel button. Then, touch the Send Screen To E-mail
button from the Print flyout menu.
Touch Utilities → Utilities Setup... and click the Hardcopy
tab. On the Hardcopy dialog, touch the E-Mail button.
1. Touch inside the File Format data entry control and select a graphic
file format from the pop-up menu.
2. Touch the Colors control and choose Standard to print the screen as
it appears, Print to print the waveforms on a white background, or
Black & White to print the waveforms in black & white.
3. Touch the Prompt for message to send with mail checkbox if you
want to include remarks with the image.
4. Touch the Hardcopy Area control to choose which part of the
screen you want to print. Choose Grid Area Only if you do not need
to print the dialog area and you only want to show the waveforms
and grids. Choose DSO window if you want to print the dialogs with
the waveforms and grids. Choose Full Screen if you want to print the
entire screen.
5. Touch the Print Now button.
PLEASE NOTE THE FOLLOWING:

The instrument's hard disk is partitioned into drive C: and drive D:. Drive
C: contains the Windows operating system and the instrument application
software. Drive D: is intended for data files.

Once you have configured your various settings from the Hardcopy dialog,
you can touch the Print front panel button and choose any of the
configured options from the Print flyout menu. The instrument
automatically uses the additional file settings to save the screen image to
the file.