Teledyne LeCroy LabMaster 9Zi-A - Manual (Page 23)

Getting Started Manual
922157-00 Rev A 15
PLEASE NOTE THE FOLLOWING:

Cap-off unused ChannelSync SMA sockets (item 1) using the provided
chain-linked 50 Ω terminations (not shown).

DVI-D Video Output and Input connectors (items 5 and 6) must be
connected with the supplied 1 foot cable for your touch-screen display to
function.

The PCIe 4 Lane Data Inputs (item 6) also accommodate PCIe Expansion
Slot options for GPIB and LSIB. Option cards must be specified when
ordering and installed at the Teledyne LeCroy factory into any number of
the same five slots used for the Acquisition Modules. The slot between
the DVI-D Video Output connector and the PCIe 4 Lane Data Connection
for Channels 1-4 is unavailable.

The AUX IN connection for 50 Ω input only is provided on the back of the
9CZi-A Master Control Module.

10 MHz Reference Clock Inputs are specifically intended for
synchronization with other instruments; not between Master and Slave
modules.