GW Instek AFG-2000 User Manual - Manual (Page 118)

AFG-2000 Series User Manual
116
The modulation source is set to internal.
SOURce[1]:FM:INTernal:FUNCtion
Set
Query
Description Sets the shape of the modulating waveform from
sine, square or ramp. The default shape is sine.
Note
Square waveforms have a 50% duty cycle. Ramp
waveforms have a symmetry of 100%.
Syntax SOURce[1]:FM:INTernal:FUNCtion
{SINusoid|SQUare|RAMP }
Example SOUR1:FM:INT:FUNC SIN
Sets the FM modulating wave shape to sine.
Query Syntax SOURce[1]:FM:INTernal:FUNCtion?
Return Parameter SIN Sine
SQU Square
RAMP Ramp
Query Example SOUR1:FM:INT:FUNC?
>SIN
The shape for the modulating waveform is Sine.
SOURce[1]:FM:INTernal:FREQuency
Set
Query
Description Sets the frequency of the internal modulating
waveform only. The default frequency is 10Hz.
Syntax SOURce[1]:FM:INTernal:FREQuency
{<frequency>|MINimum|MAXimum}
Parameter <frequency> 2 mHz ~ 20 kHz
Example SOUR1:FM:INT:FREQ +1.0000E+02
Sets the modulating frequency to 100Hz.
Query Syntax SOURce[1]:FM:INTernal:FREQuency?
[MINimum|MAXimum]