GW Instek AFG-2000 User Manual - Manual (Page 127)

REMOTE INTERFACE
125
Example SOUR1:FREQ:STAR +2.0000E+03
Sets the start frequency to 2kHz.
Query Syntax SOURce[1]:FREQuency:STARt? [MINimum|
MAXimum]
Return Parameter <NR3> Returns the start frequency in Hz.
Query Example SOUR1:FREQ:STAR? MAX
>+2.0000E+07
Returns the maximum start frequency allowed.
SOURce[1]:FREQuency:STOP
Set
Query
Description Sets the stop frequency of the sweep. 1 kHz is the
default start frequency.
Note
To sweep up set the stop frequency higher than the
start frequency. Set the stop frequency lower than
the start frequency to sweep down.
Syntax SOURce[1]:FREQuency:STOP
{<frequency>|MINimum|MAXimum}
Parameter <frequency> 0.1Hz ~ 25MHz*
0.1Hz ~ 1MHz (Ramp)
*AFG-2112 limited to 12MHz, AFG-2105 limited to
5MHz.
Query Example SOUR1:FREQ:STOP +2.0000E+03
Sets the stop frequency to 2kHz.
Query Syntax SOURce[1]:FREQuency:STOP? [MINimum|
MAXimum]
Return Parameter <NR3> Returns the stop frequency in Hz.
Example SOUR1:FREQ:STOP? MAX
>+2.0000E+07
Returns the maximum stop frequency allowed.