Select a waveform, Sine, square, ramp, noise waveform, Setting the frequency – GW Instek AFG-2000 User Manual User Manual
Page 38
Advertising
AFG-2000 Series User Manual
36
Select a Waveform
The AFG-2000 can output four standard waveforms: sine, square,
ramp and noise waveforms.
Sine, Square, Ramp, Noise Waveform
Panel Operation
1. Press the FUNC key
repeatedly to select a
standard waveform (Sine,
Square, Ramp, Noise).
FUNC
→
Example:
Sine wave
Note
The modulation, FSK, sweep and counter functions
must be disabled before a standard waveform can be
output.
Setting the Frequency
Panel Operation
1. Press the FREQ key.
FREQ
2. The FREQ icon will flash in the frequency
display area.
Advertising