GW Instek AFG-2000 User Manual - Manual (Page 56)

AFG-2000 Series User Manual
54
3. Use the arrow
keys, scroll wheel
and Enter key to
edit the amplitude.
→
Enter
Use the keypad
and the relevant
unit key to enter a
new amplitude.
0 /
3 2 1
4
7 8
5
9
6
→
Hz/Vpp
kHz/Vrms
MHz/dBm
Range No Load 2mVpp~20Vpp
2mVpp~10Vpp for 20MHz – 25MHz
50Ω load 1mVpp~10Vpp
1mVpp~5Vpp for 20MHz – 25MHz
Example:
AMPL= 1Vpp
Setting the Modulating Wave Shape
The AFG-2100 has sine, square and ramp modulating waveform
shapes. Sine waves are the default wave shape. The modulating
wave shape is for internal sources only.
Panel Operation 1. Press the Shift + Shape key
repeatedly to select a shape
waveform. Shift
+
Shape
AM
→