Setting the modulation frequency (rate), Operation, Panel operation 1. press the shift + rate key – GW Instek AFG-2000 User Manual User Manual
Page 49
Advertising
OPERATION
47
Restrictions
Square
50% duty cycle
Ramp
50% symmetry
Example:
Shape = Sine
Setting the Modulation Frequency (Rate)
Panel Operation
1. Press the Shift + Rate key.
Shift
+
Rate
FSK
2. The Rate icon will flash in the frequency
display area.
3. Use the arrow
keys, scroll wheel
and Enter key to
edit the rate.
→
Enter
Use the keypad
and the relevant
unit key to enter a
new rate.
0
/
3
2
1
4
7
8
5
9
6
→
Hz/Vpp
kHz/Vrms
Range
(Internal source) 2mHz ~ 20kHz
Default
100Hz
Advertising