Setting the sweep source (trigger), Operation – GW Instek AFG-2000 User Manual User Manual
Page 73
Advertising
OPERATION
71
3. Use the arrow
keys, scroll wheel
and Enter key to
edit the rate.
→
Enter
Use the keypad
and the relevant
unit key to enter a
new rate.
0
/
3
2
1
4
7
8
5
9
6
→
Hz/Vpp
kHz/Vrms
Range
Sweep Rate
1kHz ~ 2mHz (1ms ~ 500s)
Default
100Hz
Example:
Rate= 100Hz
Setting the Sweep Source (Trigger)
With the source set to EXT, the function generator will sweep each
time a trigger signal is received. After a sweep output has completed,
the function generator waits for a trigger signal before starting the
next sweep. The default trigger source is internal.
Panel Operation
1. Press the Shift + INT/EXT
key to select the
modulation source.
Shift
+
INT/EXT
kHz/Vrms
→
Advertising