GW Instek AFG-2000 User Manual - Manual (Page 45)

OPERATION
43
Amplitude Modulation (AM)
(AFG-2100 Series)
An AM waveform is produced from a carrier waveform and a
modulating waveform. The amplitude of the modulated carrier
waveform depends on the amplitude of the modulating waveform.
The AFG-2100 function generator can set the carrier frequency,
amplitude and offset as well as internal or external modulation
sources.
AM modulation is only applicable for the AFG-2105, AFG-2112 and
the AFG-2125 function generators.
Modulated Carrier
Waveform
Modulating
waveform
Selecting AM Modulation
Panel Operation 1. Press the AM key.
AM
2. The modulation, sweep and counter menu
display will appear. The AM icon indicates
that the AM function is active.