GW Instek AFG-2000 User Manual - Manual (Page 87)

REMOTE INTERFACE
85
Selecting the USB Remote Interface
The AFG-2000 uses a USB interface for remote control. Connecting
to USB
USB
configuration PC side connector Type A, host
AFG-2000 side
connector Type B, slave
Speed 1.1/2.0 (full speed)
Panel Operation 1. Connect the
Type B USB—USB-A cable
from the PC to the type B
USB port on the rear panel.
2. When the PC asks for the USB driver, select
XXXXXXX.inf included in the software
package or download the driver from the GW
website,
www.gwinstek.com .
3. The USB icon will appear when the USB
connection is active.
Remote control terminal connection
Terminal
application Invoke the terminal application such as Hyper
Terminal. Make note of the COM port, baud rate,
stop bit, data bit, and parity accordingly from the
Windows Device Manager.
To check the COM port settings, see the Device
Manager in the PC. For WinXP, Control panel →
System → Hardware tab.