GW Instek AFG-2000 User Manual - Manual (Page 59)

OPERATION
57
Square DC ~ 25MHz*
Ramp DC ~ 1MHz
Default 10Hz
*limited to 5MHz for the AFG-2105, 12MHz for
the AFG-2112.
Note
The frequency deviation must be equal to or
less than the carrier frequency.
The sum of the carrier frequency and
frequency deviation must be less than or
equal to the maximum carrier.
The maximum frequency deviation allowed
will be limited by the set carrier frequency.
Example:
DEV = 10Hz
Setting the Modulation Source
Panel Operation 1. Press the Shift + INT/EXT
key to select the
modulation source. Shift
+
INT/EXT
kHz/Vrms
→
2. The modulation source will be displayed at
the bottom of the screen.
Range Source INT, EXT