GW Instek AFG-2000 User Manual - Manual (Page 70)

AFG-2000 Series User Manual
68
Example:
Sweep activated
Note
Sweep modulation can be deactivated by pressing the
Sweep key again.
Setting Start and Stop Frequency
The start and stop frequencies define the upper and lower sweep
limits. The function generator will sweep from the start through to
the stop frequency and cycle back to the start frequency. The sweep
is phase continuous over the full sweep range.
Panel Operation 1. Pressing the Shift +
Start/Stop key will toggle
between the start and stop
frequencies. Select the Start
frequency icon. Shift
+
Start/Stop
Sweep
→ Start
2. The Start icon will flash in the frequency
display area when selected.
3. Use the arrow
keys, scroll wheel
and Enter key to
edit the start
frequency.
→
Enter