GW Instek AFG-2000 User Manual - Manual (Page 48)

AFG-2000 Series User Manual
46
3. Use the arrow
keys, scroll wheel
and Enter key to
edit the amplitude.
→
Enter
Use the keypad
and the relevant
unit key to enter a
new amplitude.
0 /
3 2 1
4
7 8
5
9
6
→
Hz/Vpp
kHz/Vrms
MHz/dBm
Range No Load 2mVpp~20Vpp
2mVpp~10Vpp for 20MHz – 25MHz
50Ω Load 1mVpp~10Vpp
1mVpp~5Vpp for 20MHz – 25MHz
Example:
AMPL= 1Vpp
Setting the Modulating Wave Shape
The AFG-2100 has sine, square and ramp modulating waveform
shapes. Sine waves are the default wave shape.
Panel Operation 1. Press the Shift + Shape key
repeatedly to select a shape
waveform. Shift
+
Shape
AM
→
2. The waveform Shape is displayed in blue at
the bottom of the panel.