Using the frequency counter, Selecting the frequency counter function, Selecting the gate time – GW Instek AFG-2000 User Manual User Manual
Page 77
Advertising
OPERATION
75
Using the Frequency Counter
Selecting the Frequency Counter Function
Connection
Connect the signal source to
Counter input port on the rear
panel.
OUTPUT
INPUT
MOD
Counter
MOD
Trigger
Panel Operation
1. Press the Count key.
Gate
Count
2. The current gate time and the Count icon will
appear in the display when the counter
function is active.
The input frequency will be shown in the
frequency display area.
Example: input
frequency of 1kHz
Selecting the Gate Time
Panel Operation
1. Ensure the Count function
is active.
Page 75
Advertising