Operation – GW Instek AFG-2000 User Manual User Manual
Page 71
Advertising
OPERATION
69
Use the keypad
and the relevant
unit key to enter a
new start
frequency.
0
/
3
2
1
4
7
8
5
9
6
→
Hz/Vpp
kHz/Vrms
MHz/dBm
Range
Sine
0.1Hz ~ 25MHz*
Square
0.1Hz ~ 25MHz*
Ramp
0.1Hz ~ 1MHz
Default
Start: 100Hz, Stop: 1kHz
*limited to 5MHz for the AFG-2105, 12MHz for
the AFG-2112.
4. Repeat steps 1 to 3 for the Stop frequency.
Note
To sweep from a low to high frequency, set the Start
frequency < Stop frequency.
To sweep from a high to low frequency, set the Start
frequency > Stop frequency.
Example:
Start = 100Hz
Example:
Stop = 1kHz
Advertising