Setup, Level names, Fulltest 3 en - 63 – HT instruments FULLTEST3 User Manual
Page 64: Setup menu, Figure 54 : setup menu, Level names menu, Figure 55 : level names menu, Figure 56 : set level name menu
FULLTEST
3
EN - 63
6.5. SETUP menu
DATE/TIME
NOMINAL VOL.
SETUP
LEVEL NAMES
SAFET INPUT
RESET
CONTACT VOL.
Figure 54
: SETUP menu
6.5.1. LEVEL NAMES menu
Three levels are available when saving test results i.e. LEVEL1, LEVEL2 and LEVEL3. In production the
three levels are dedicated to CUSTOMER, LOCATION and MACHINE, but operator can rename them
freely for example to DEVICE, DEPARTMENT and LOCATION.
In order to do this the LEVEL NAMES menu shall be used.
LEVEL NAMES
LEVEL 1
CUSTOMER
LEVEL 2
LOCATION
LEVEL 3
MACHINE
Figure 55
: LEVEL NAMES menu
Press the level touch-screen key you wish to rename for example LEVEL 1, the following menu will
appear.
Figure 56
: SET LEVEL NAME menu
Modify existing name and confirm it by pressing the ENTER touch-screen key, the menu will turn to
LEVEL NAMES menu.
Repeat the operation for the other two levels if needed by following the same procedure.