HT instruments FULLTEST3 - Manual (Page 87)

FULLTEST 3
EN - 86
TRMS Load Current (POWER)
Display range
A
Resolution
A
Accuracy Overvoltage protection
0.00  0.99 0.01
± (3% rdg. + 3 dgt) CAT II 300 V
1.0  20.0 0.1
Frequency range: 15  723 Hz
Over-range limit: Yes, the measurement will be automatically interrupted 10 s
after exceeding 16 A
Pre-Test Grounding of PE terminal on wall schuko socket
TRMS Mains Voltage (POWER)
Display range
V
Resolution
V
Accuracy Overvoltage protection
195  253 1 ± (2% rdg. + 2 dgt) CAT II 300 V
Frequency range: 15  723 Hz
Apparent Power / Active Power (POWER)
Display range
VA/W
Resolution
VA/W
Accuracy Overvoltage protection
0.0  99.9 0.1 ± (5% rdg. + 10 dgt)
CAT II 300 V 100  999 1
± (5% rdg. + 3 dgt)
1.00  5.06 k 10
Limit value P APP: Adjustable 6  999 VA, 1.00 kVA  5.06 kVA
Power factor (POWER)
Display range Resolution Accuracy Overvoltage protection
0.00  1.00 0.01 Respect the accuracy of P APP and P ACT CAT II 300 V
TRMS Leakage Current I PE (POWER)
Display range Resolution Accuracy Overvoltage protection
0.25  19.99 mA 0.01 mA
± (3% rdg. + 3 dgt) CAT II 300 V
20.0  49.9 mA 0.1 mA
0.05  0.99 A 0.01 A
1.0  10.0 A 0.1 A
Load current influence: ± 0.01 mA / A
Limit value: Adjustable 0.25 mA  10.00 A, standard limit value 3.50 mA
Frequency range: 40 Hz  100 kHz (characteristics according to
DIN EN 61010-1 Annex A, fig. A.1 and VDE 0411 Part 1)
Measurement method: Differential
Mains cord polarity exchange Internally by using the L POS key
UUT mains on switch test: Yes, the test done by measuring L current, limit value 25 mA
Over-range limit (I PE ): Yes, the measurement will be automatically interrupted 10 s
after exceeding 10 A
Over-range limit (I L ): Yes, the measurement will be automatically interrupted 10 s
after exceeding 18 A