HT instruments FULLTEST3 User Manual
Page 72
FULLTEST
3
EN - 71
7. MEMORY FEATURES
Any memory address consists of three levels i.e. LEVEL 1 (in production set to CUSTOMER), LEVEL 2
(in production set to LOCATION) and LEVEL 3 (in production set to MACHINE). The memory address
(at least LEVEL 1 i.e. CUSTOMER) should be entered after the first pressing the SAVE hard key.
Additionally comment can be added to each saved result. Once the address is entered, it will be offered
any time when save operation is activated. Serial number of saved result is added automatically
chronologically. Date, time and operator are attached automatically, that is why it is important to check
correct settings before carrying out the measurements.
7.1. MEMORY STRUCTURE
Measurement result, limit value and parameters are saved to selected memory address upon receiving
the SAVE command. The following structure of the memory address is offered:
Figure 62: Storage structure
LEVEL1 (e.g. CUSTOMER):
Customer name (max. 12 characters)
LEVEL2 (e.g. LOCATION):
Location of the customer (max. 12 characters)
LEVEL3 (e.g. MACHINE):
Machine name (max. 12 characters)
NO.:
Serial number of saved result added automatically chronological way
regardless
of
memory
address.
COMMENT:
Comment (max. 30 characters)