HT instruments FULLTEST3 - Manual (Page 8)

FULLTEST 3
EN - 7
 RCD test
-
AC, A and B type.
-
General, selective and delayed characteristic.
-
Voltage range 100 ... 265 V.
-
Limit contact voltage 25 or 50 V.
-
I N = 10, 30, 100, 300, 500, 650 or 1000 mA.
-
Trip out time at I N /2 (AC, A and B type).
-
Trip out time at I N (AC, A and B type).
-
Trip out time at 2I N (AC and A type).
-
Trip out time at 5I N (AC and A type) or at 4I N (B type).
-
Ramp test (AC, A and B type).
-
AUTO test (AC, A and B type).
-
Visual and acoustic warning in case of exceeded limit value.
EN61557-6
 Loop impedance measurement
-
Z L/N , Z L/L and Z L/PE measurement.
-
Voltage range 100  460 V.
-
I PSC calculation.
-
Limit value adjustable, visual and acoustic warning in case of exceeded
value.
EN60204-1-§18.2
EN61557-3
 Global earth resistance
-
Selectable test current with regard to involved RCD.
-
I N = 10, 30, 100, 300, 500, 650 or 1000 mA.
-
Measurement with I N /2 (without tripping out RCD)
-
Voltage range 100  265 V.
-
Contact voltage U C measured during the measurement.
-
Limit value (R A ) fixed to 25 or 50 V/I N , visual and acoustic warning in
case of exceeded value.
 Residual voltage
-
Measurement on power plug (2-wire method).
-
Measurement on internal components (4-wire method).
-
Limit discharge time 1 s or 5 s.
-
LINEAR or NONLINEAR mode.
-
Visual and acoustic warning in case of exceeded limit value.
EN60204-1-§18.5
 Power (on schuko socket)
-
Apparent power P APP .
-
Real power P.
-
Mains voltage U L/N .
-
Load current I L .
-
Power factor PF.
-
Leakage current I PE (differential method).
-
Internal phase position exchange.
-
Limit value (apparent power) adjustable, visual and acoustic warning in
case of exceeded value.
 Phase sequence
-
Mains voltages U L1/2 , U L2/3 , U L3/1 simultaneously displayed.
EN61557-7