Allied Telesis AT-S63 User Manual
Page 105
AT-S63 Management Software Web Browser User’s Guide
Section II: Advanced Operations
105
The information in the tab is defined below:
Current Drives
Specifies the location of the files displayed in the Current Files section
of the tab. The Flash option represents the switch’s flash memory. This
is the default selection. The Flash Card option only appears for those
AT-9400 Switches that feature a flash card slot.
Default Configuration File
Specifies the filename of the active configuration file. The switch uses
this file to configure its operating parameters when reset or power
cycled. The switch also updates the active boot file when you select
the Save Config option.
The columns in the List Files table are described below. This
information is for viewing purposes only. If your unit has a compact
flash card slot, the switch, by default, displays the files in flash
memory. To view the files on a card, go to step 4.
File Name
Name of the system file.
Device
The device type, either “flash” for flash memory or “cflash” for compact
flash card.
Size
Size of the file, in bytes.
Modified
The time the file was created or last modified, in the following date and
time format: month/day/year hours:minutes:seconds.
Attributes
The file type, one of the following:
Normal
Read Only
Hidden
System
Volume
Directory
Archive
Invalid
4. To view the files on a compact flash card, insert the card into the slot
on the switch, select Compact Flash under Current Drivers, and click
Apply.