Displaying access table entries, Figure 102: snmpv3 view table tab (monitoring) – Allied Telesis AT-S63 User Manual
Page 261
Advertising
AT-S63 Management Software Web Browser User’s Guide
Section III: SNMPv3
261
The SNMPv3 View Table tab is shown in Figure 102.
Figure 102. SNMPv3 View Table Tab (Monitoring)
Displaying Access
Table Entries
To display entries in the SNMPv3 Access Table, perform the following
procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 5 on page 38.
2. Select the SNMP tab.
The SNMP tab is shown in Figure 100 on page 259.
3. In the SNMPv3 section, click the button next to View Access Table
and then click View at the bottom of the tab.
Advertising