Allied Telesis AT-S63 - Manual (Page 70)

Chapter 4: SNMPv1 and SNMPv2c
70 Section I: Basic Operations
Deleting an SNMPv1 and SNMPv2c Community
To delete an SNMPv1 and SNMPv2c community, perform the following
procedure:
1. From the Home page, select Configuration.
2. From the Configuration menu, select the Mgmt. Protocols option.
3. Select the SNMP tab.
The SNMP tab is shown in Figure 14 on page 64.
4. In the SNMPv1 & SNMPv2c section, click Configure.
The SNMPv1 & SNMPv2c Communities tab is shown in Figure 15 on
page 66.
5. Click the button next to the community name to delete and click
Remove. You can delete only one community string at a time.
A warning message is displayed.
6. Click OK.
The community string is deleted from the switch.
7. To permanently save the change, select the Save Config menu
option.