Allied Telesis AT-S63 - Manual (Page 26)

Chapter 1: Basic Switch Parameters
26 Section I: Basic Operations
Configuring the Switch’s Name, Location, and Contact
This procedure assigns a name to the switch. The name appears at the
top of the web browser windows. Names can help you identify your
switches when you manage them and avoid performing a configuration
procedure on the wrong switch. This procedure also assigns the name of
the administrator responsible for maintaining the unit and the location of
the switch.
To assign a name, location, and contact to a switch, perform the following
procedure:
1. From the home page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 1.
Figure 1. General Tab (Configuration)