Allied Telesis AT-S63 - Manual (Page 287)

AT-S63 Management Software Web Browser User’s Guide
Section IV: Spanning Tree Protocols 287
The Monitor RSTP Parameters tab is shown in Figure 117.
Figure 117. Monitor RSTP Parameters Tab (Monitoring)
5. To view port settings, click a port in the switch image and click Status
or Settings. You can select more than one port.
An example of the RSTP Status page is shown in Figure 119.
Figure 118. RSTP Port Status Page
The RSTP Port Status page displays a table that contains the following
columns of information:
Port
The port number.
State
The RSTP state of the port. The possible states for a port connected to
another device running RSTP are Discarding and Forwarding.