Displaying snmpv3 community table entries – Allied Telesis AT-S63 User Manual
Page 266
Advertising
Chapter 17: SNMPv3
266
Section III: SNMPv3
The SNMPv3 Target Parameters Table tab is shown in Figure 107.
Figure 107. SNMPv3 Target Parameters Table Tab (Monitoring)
Displaying
SNMPv3
Community
Table Entries
To display entries in the SNMPv3 Community Table, perform the following
procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 5 on page 38.
2. Select the SNMP tab.
The SNMP tab is shown in Figure 100 on page 259.
3. In the SNMPv3 section, click the button next to View Community
Table and then click View at the bottom of the tab.
Advertising