Displaying port statistics – Allied Telesis AT-S63 User Manual
Page 51
AT-S63 Management Software Web Browser User’s Guide
Section I: Basic Operations
51
Displaying Port Statistics
To display the statistics of a port, perform the following procedure:
1. From the Home page, select Monitoring.
2. From the Monitoring menu, select the Layer 1 option.
The Layer 1 page is displayed with the Port Settings tab selected by
default, as shown in Figure 8 on page 49. The Port Setting tab displays
a image of the front of the switch. Ports with a valid link to an end node
are green.
3. In the switch image, click a port. You can select only one port when
displaying statistics. A selected port turns white. (To deselect a port,
click it again.)
4. Click Statistics.
The Port Statistics page is shown in Figure 10.
Figure 10. Port Statistics Page
The Port Statistics page displays a table with the following columns of
information:
Bytes Received
Number of bytes received on the port.
Bytes Sent
Number of bytes transmitted from the port.
Frames Received
Number of frames received on the port.