Allied Telesis AT-S63 User Manual
Page 78
Advertising
Chapter 5: MAC Address Table
78
Section I: Basic Operations
multicast application is located results in the failure of the multicast
packets to be properly forwarded to the host nodes. You can specify
the ports individually (e.g., 1,4,5), as a range (e.g., 11-14) or both
(e.g., 15-17,22,24).
VLAN ID
Specifies the VLAN ID where the port is a member.
5. Click Apply.
6. Repeat this procedure to add other static addresses to the switch.
7. To permanently save your changes, select the Save Config option in
the Configuration menu.
Advertising