Displaying securitytogroup table entries, Figure 103: snmpv3 access table tab (monitoring) – Allied Telesis AT-S63 User Manual
Page 262
Advertising
Chapter 17: SNMPv3
262
Section III: SNMPv3
The SNMPv3 Access Table tab is shown in Figure 103.
Figure 103. SNMPv3 Access Table Tab (Monitoring)
Displaying
SecurityToGroup
Table Entries
To display entries in the SNMPv3 SecurityToGroup Table, perform the
following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 5 on page 38.
2. Select the SNMP tab.
The SNMP tab is shown in Figure 100 on page 259.
3. In the SNMPv3 section, click the button next to the View
SecurityToGroup Table and then click View at the bottom of the tab.
Advertising