Allied Telesis AT-S63 - Manual (Page 298)

Chapter 19: Multiple Spanning Tree Protocol
298 Section IV: Spanning Tree Protocols
Managing MSTIs
This section contains the following procedures:
 “Creating an MSTI” on page 298
 “Modifying an MSTI” on page 299
 “Deleting an MSTI” on page 300
Creating an
MSTI
To create an MSTI, perform the following procedure:
1. From the home page, select Configuration.
2. From the Configuration menu, select the Layer 2 option.
3. Select the Spanning Tree tab.
The Spanning Tree tab is shown in Figure 109 on page 272.
4. Click Configure.
The expanded MSTP Spanning Tree tab is shown in Figure 121 on
page 295.
5. In the CIST/MSTI Table section of the tab, click Add.
The Add New MSTI page is shown in Figure 122.
Figure 122. Add New MSTI Page
6. In the MSTI ID field, enter an ID number for the MSTI. The range is 1
to 15.