Displaying the cos settings – Allied Telesis AT-S63 User Manual
Page 159
Advertising
AT-S63 Management Software Web Browser User’s Guide
Section II: Advanced Operations
159
Displaying the CoS Settings
To display the CoS settings, perform the following procedure:
1. From the Home page, select Monitoring.
2. From the Monitoring menu, select Services.
The Services page is displayed with the CoS tab selected by default,
as shown in Figure 53.
Figure 53. CoS Tab (Monitoring)
3. Click the port whose settings are to be displayed. You can select more
than one port. A selected port turns white. (To deselect a port, click it
again.)
4. Click View.
The CoS Setting for Port page is shown in Figure 54.
Figure 54. CoS Setting for Port Page
Advertising