Allied Telesis AT-S63 - Manual (Page 49)

AT-S63 Management Software Web Browser User’s Guide
Section I: Basic Operations 49
Displaying Port Parameters
To display the parameter settings of a port, perform the following
procedure:
1. From the Home page, select Monitoring.
2. From the Monitoring menu, select the Layer 1 option.
The Layer 1 page is displayed with the Port Settings tab selected by
default, as shown in Figure 8.
Figure 8. Port Settings Tab (Monitoring)
The Port Settings tab displays an image of the front of the switch. Ports
with a valid link to an end node are green.
3. In the switch image, click a port. You can select more than one port. A
selected port turns white. (To deselect a port, click it again.)
4. Click Status.