Allied Telesis AT-S63 User Manual
Page 171
Advertising
AT-S63 Management Software Web Browser User’s Guide
Section II: Advanced Operations
171
Parent Policy ID
The QoS policies to which the traffic class is assigned.
Flow Group List
The flow groups assigned to this traffic class.
4. To create a new traffic class, click Create.
The Create Traffic Class page is shown in Figure 61.
Figure 61. Create Traffic Class Page
5. Configure the following parameters:
ID
Specifies an ID number for the traffic class. Each traffic class on the
switch must be assigned a unique number. The range is 0 to 511. The
default is 0. This parameter is required.
Description
Specifies the traffic class description. A description can be up to 15
alphanumeric characters, including spaces.
Advertising