Figure 33: event log tab (configuration) – Allied Telesis AT-S63 User Manual
Page 119
Advertising
AT-S63 Management Software Web Browser User’s Guide
Section II: Advanced Operations
119
The Event log tab is shown in Figure 33.
Figure 33. Event Log Tab (Configuration)
4. In the Log Settings section, click Enabled for the Status to enable the
event logs, or Disabled to disable the event logs and to stop the switch
from sending events to syslog servers. The default setting is enabled.
5. Click Apply to activate the settings on the switch.
If you enabled the logs, the switch immediately begins to add events to
the logs and send events to defined syslog servers.
6. To permanently save your changes, select the Save Config option in
the Configuration menu.
Advertising